Spiral Anksys
ECORAW

Insulation fixings | new insulation systems based on EPS

New insulation systems based on EPS

Spiral Anksys® technology is certified in accordance with the applicable European regulations EAD for use in new ETICS thermal insulation composite systems with foamed polystyrene (EPS), expanded polystyrene (XPS), polyurethane (PUR), polyisocyanurate (PIR), phenolic foams (PF) and other insulation with a tensile strength of min. TR 80 kPa.

 

Spiral Anksys® SA anchors can be used in fully bonded or partially glued systems with additional fixing and 40% adhesive surface, or in fully anchored systems with bonding adhesive and adhesive area up to 20%. Injected anchors are placed in joints and in the areas of insulating boards. The anchors are designed solely for countersunk mounting using the SAT application kit.

Photogallery

  •  

  •  

  •  

Technical specifications

Anchor type:

Spiral Anksys® SA

Approximate number of anchors:

6-8 pcs / m2 - structural analysis

Type of expansion mass:

SAF1 or SAF3

Insulation thickness:

up to 300 mm

Point thermal transfer:

0,000 W/K na kotvu dle TR 025

Load capacity:

by substrate category 0.75 to 1.50 kN

Wind load (pull):

up to 850 N / deformation to 3 mm

Weight load (shear):

up to 25 kg / deformation to 1 mm